For continuous and intermittent, cervical and lumbar traction The Eltrac 471 is a unique combination of computer technology, functional design and operational convenience. The unit is ideal for lumbar and cervical traction.
Continuous and intermittent traction The traction force of the Eltrac 471 can be set to continuous or intermittent. A special control must be pressed for traction forces above 200 N (ca. 20 kg). This safety system prevents accidental unacceptable high traction forces during, for instance, cervical traction. Safety The control panel shows various parameters which can be selected with fingertips controls like traction force, base force, base hold time and treatment time. The traction force is electronically measured and constantly monitored. A microcomputer compares the actual readings with the set values and immediately eliminates any differences. Patient movement is recorded and does not influence the traction force. The patient can gradually reduce the traction power to the minimum value (15 N) by simply pressing the safety stop switch.
Continuous and intermittent traction . Traction forces up to 900 N (appr 90 kg) . Safety control for traction forces above 200 N (appr 20 kg) . Constant electronical monitoring of the traction force
Standard accessoires:
1471800 Patient stop switch for Eltrac 471
1471801 Fixing knobs, set of 4, for Eltrac 471
1471806 Nylon cord 170 cm with carabine hook, for Eltrac 471
3444291 Mains cable 115V - USA
1471751 Operating manual Eltrac 471
Technical specifications:
Types of therapy: static traction, intermittent traction
